Reading taking is complete. Please go to graph plotting Please change the load to val A Take reading for Test instrument should be value. Calibrate the test Ammeter of 5A, using a standard Ammeter.Drag and drop instruments from the shelf to the table.Click and drag from any terminal of an instrument to any of the panel-terminals for connecting wires. Maximum range should be greater than Test Ammeter's range The scale is too large,it will causes problem to take reading This instrument is not required for this experiment. No more instruments of this type are required for this experiment. Wrong connection.Try again. Please connect via instrument. All instruments are not connected. Connect to power supply. This node is occupied.You can't use this. This node is correct but already occupied.please remove the already connected wire first. This should be used for fuse connection Place the fuse in proper position. Connect the fuse at first. It is not an appropriate rating. It is not an appropriate rating. The load box should be set at value Amp. Place the instrument in different position